Capnut group

帽盖端接

Capnut 终端设计用于将地下电缆连接到发电机、开关柜、变压器、架空线路或分段设备。所有终端均按照 1975 年 IEEE 48 标准进行测试。

用于端接与发电机、开关设备、变压器、架空线路或分段设备相连的绝缘电缆。

功能和优点

  • 额定电压为 15 千伏、25 千伏、34.5 千伏和 46 千伏的单导体装置

  • 支架和法兰安装型号,用于杆式安装或设备安装

  • 模块化设计可根据应用和电缆设计进行定制

  • 三导体单元的额定电压分别为 15 千伏、25 千伏和 34.5 千伏

  • 可接受任何结构的固体介质、纸绝缘或铠装电缆

  • 在使用信息可能有限的传统电缆系统时,胶带应力锥可进行现场调整

Ratings Chart for Capnut Terminations

Voltage152534.546
BIL (kV)110150200250
Current RatingSame as cableSame as cableSame as cableSame as cable
1 minute dry, ac (kV)506590120
6 hour dry, ac (kV)355575100
10 second wet, ac (kV)456080100
15 minute dry, dc (kV)75105140170

Accessories Chart for Capnut Accessories

Cable TypeWSWSV-CCWSV-ACWSV-WAFRSRSF-CCRSF-ACRSF-WAFRSADPDP-CCDP-EE-ACDP-EE-WAF
PILC
VCLC
RILC
1 or 3 Conductor3 Conductor1 or 3 Conductor3 Conductor3 Single Conductors3 Single Conductors
EPR
XLP
1 or 3 Conductor3 Conductor3 Single Conductors3 Single Conductors
High mole Polyethylene and Kerits1 or 3 Conductor MAY REQUIRE TUBE SEAL3 Conductor MAY REQUIRE TUBE SEAL3 Single Conductors MAY REQUIRE TUBE SEAL3 Single Conductors MAY REQUIRE TUBE SEAL
Flat Steel Armored3 Conductor3 Conductor1 or 3 Conductor
Interlocked* Armor3 Conductor
Wire Armor3 Conductor3 Conductor1 or 3 Conductor
Type CCE Split Conduit Extension Adaptable
*Application on cable with a solid jacket under the armor. For cables with a jacket over the armor, a cable entrance fitting combination (DP3-EE-EE-GL-ACC-DP-1) can be used.
Aerial Lugs Accessories include: Style 3-D Clamp style, Style 8 Bertial 4 hole and Style 18 Horizontal Bus style
Novoid Accessories include: Novoid A and Novid X for use with PILC Cable, Novoid A and Novoid 224 for use with XLPE/EPR.
Novoid 224 not applicable with PILC Cable. Novoid X not applicable with XLPE/EPR.

Download product brochures, article, white paper and case study:

Product Literature

Article

Need more information? Contact the rep in your area.